:	Dec 2, 2004

.

Remove the tailgate trim panel.

.

Release the liftgate actuator.   Loosen the 2 bolts.   Disconnect the electrical connector.

.

Remove the actuator cover.   Remove the 2 Torx screws.

.

Remove the liftgate actuator.   Release the liftgate latch to actuator cable.

.

: It is possible to incorrectly install the cable, ensure the ferrule and clip are fully engaged. Attach the actuator to the liftgate latch cable.

.

Install the cover.   Tighten the Torx screws.

.

Install the liftgate actuator.   Tighten the bolts to 10 Nm (7 lb.ft).   Connect and secure the electrical connector.

.

Install the tailgate trim panel.